top of page

Porsche Taycan Cross Turismo
ECU Removal

Porsche Taycan Cross Turismo (and Sport Turismo) ECU removal instructions are mostly identical to the sedan instruction except for:

  1. Step "03 Trunk Lid Trim Removal" is not needed

  2. Step "06 Side Carpet Access" is different. See instructions below

In addition to the tools listed on the sedan instructions you will also need:

  • T25 Torx bit

Please follow the Sedan removal instructions first before continuing with the instructions below.



Remove Speaker Cover

With a plastic pry bar (or flathead screwdriver) start pushing the rear driver speaker cover at the seal towards the inside until the clips disengage. Set aside cover.

06 (a)

Remove Torx Screws

With a Torx-25 bit remove 2x Torx screws. Set screws aside.


06 (b)

Unplug Trunk Light

With your fingernail push down the nose of the trunk light connector and pull out.

Continue with "07 ECU removal"in sedan instructions.

bottom of page